•  
    Installation & Commissioning of BTS Equipment

    Scope of work:
    • Receipt of site information from customer along with TND/RND
    • RFI check along with ensuring the site permissions
    • Material reception at the sites and checking as per packing list. Intimate to the customer in case of any deficiency
    • Hoisting of GSM/CDMA antennas on tower as per TND/RND
    • Clamping and routing of RF cables from Shelter to Antennae
    • Grounding the Antennae and RF cables at appropriate place
    • Ensuring drip loop/Z loop at cable entry plate
    • Ensuring no sharp bend on RF cables
    • Fixing OGB
    • Weather proofing
    • Fixing EMPs/Surge arrestors along with connectorization in shelter
    • Grouting the BTS
    • Extending, power cables, E1 cables, grounding cables to BTS
    • Fixing IGB and extending grounding to all peripheral equipment
    • Fixing DDF
    • Installation of Battery bank and rectifier
    • Installation of internal cable try
    • Installation of indoor jumpers
    • Checking VSWR
    • Switching on the equipment
    • Commissioning the equipment as per defined procedure
    • Power measurement
    • Filling the check list and execution of quality audit

    MW Installation and commissioning

    Scope of works:

    • Receipt of site information from customer along with TND/RND
    • RFI check in near end and far end besides ensuring the site permissions
    • Material reception at both ends and checking as per packing list and intimate the customer in case of exigency
    • Assembling and hoisting of MW antennas & radios on tower in both ends as per TND/RND
    • Clamping and routing of if cables from Shelter to Antennae in both ends
    • Grounding the antennas and RF cables at appropriate place
    • Fixing Transmission rack if required in both ends
    • Installation & commissioning of IDUs in shelters
    • Alignment of MW antennas till we achieve required receive level
    • Grounding, weather proofing and labeling all cables in both ends
    • Acceptance test
     
    BSC/MSC/STP/SDH/DWDM/PTN/XDM/DLC/FSO/DSLAM Installation and commissioning

    Scope of works:
    • Receipt of site information from customer along with TND/RND
    • RFI check at the site besides ensuring the site permissions. Sending the SDR to customer
    • Material reception and checking as per packing list and intimate the customer in case of exigency
    • Grouting the equipment rack and inserting all required modules as per the manual/lay out drawing
    • Interconnection with appropriate cables/jumpers
    • Grounding the equipment
    • Installation of DCDB and extension of power to the equipment
    • Installation of DDF and extension of E1s to the equipment by Kroning
    • Installation of optical cables if required and measurement of power
    • Switching on the equipment and commissioning as per the procedure
    • Allotment of given IP address and extension of services to the subscribers
    • BER test if required
    • Preparation of AT document and sign off
     
      © 2013 Aster Private Limited. All Rights Reserved. Sitemap |  Privacy Policy
    ŷɫվ